Product Description
Crossover Pipe- Toyota 3.4L 5VZ Cali Swap Crossover Exhaust Pipe (Drivers Side Drop) (1999-2004) Kit-1043B
This exhaust crossover pipe is designed to be used when swapping a Toyota 3.4L 5VZ-FE Engine into a 1984-1995 Toyota Truck or 4Runner that has the exhaust on the drivers side. Crossover pipe flanges are 3/8". Crossover pipe has been powder coated silver to protect pipe from rust and insure a long life. The Flanges are countersunk to use the same round factory style exhaust gaskets for a factory type seal. These crossover pipes are a direct bolt up to the factory 2:1 section with the 02 sensor mount. The down pipe is part # 17410-07070, This has been discontinued by Toyota. If you have an old used one it will work. If you need a new one we make this part to bolt up. 5vz Lower Pipe
Currently we are powder coating these with Silver.
Fitment:
The drivers side drop exhaust pipe has been designed to fit with the Toyota 3.0L 3VZ-E manual transmission bell-housing with the slave cylinder on the passenger side. It will also fit the automatic transmission bell-housing. This 5VZ swap crossover exhaust pipe is designed to be used with the Toyota 3.4L 5VZ factory exhaust manifolds from 1999-2000 with California Emissions and all models from 2001-2004. This crossover pipe works with the Steel manifolds. Federal emissions 1995-2000 with cast manifolds are different flange shape. If you have these earlier manifolds you will need KIT-1043.
This pipe does not fit JDM engines! We have found that there are numerous JDM manifolds. We have not made a crossover pipe for any JDM manifolds. JDM engines are used engines imported into the US and were never sold in vehicles in the United States.
Motor Mounts- Rubber only!
Polyurethane engine mounts, while providing superior rigidity and reducing engine movement, can crack exhaust components because they transfer higher levels of engine vibration and torque directly to the chassis and exhaust system. Unlike rubber, polyurethane's rigidity allows less movement, placing excessive stress on exhaust manifolds, headers, and pipes. Warranty does not cover use of polyurethane engine mounts.
Kit Includes-
-
1 Drivers side drop exhaust crossover pipe
-
4 Exhaust gaskets 90917-06065
-
3 Exhaust studs 90116-10150
-
3 Exhaust nuts 90080-17187
081023C
Other Details
This item is backed by a 12-month manufacturer warranty What is covered? • Manufacturing defects • Faults caused by improper workmanship or materials What is not covered? • Issues caused by heat wrap. • Any modifications made to pipe. • Time loss or incidental damage. • Improper installation. • failure to properly support exhaust causing undue stress or lack of hangers.Product Videos
Custom Field
Product Reviews
5 Reviews Hide Reviews Show Reviews
-
Crossover pipe
Good quality item!
-
Customer service
After accidentally getting the wrong crossover pipe when ordering over the phone. The first representative I spoke to try and resolve the problem was very rude and degrading. After calling back I was connected with someone else that was professional and willing to help me get the right part. So the part is defiantly 5 star but if i had to give a rating on the first couple of representatives it would have been half a star.
-
Crossover pipe for our 89 forerunner build
The crossover pipe is a perfect fit
-
Knowledgeable professionals
I could not be more pleased! The guy on the phone went above and beyond helpful! He was knowlegable and recommended parts I hadn’t thought of for my install. The crossover pipe is an exact fit! Thanks again.
-
Great pipe; excellent service
Pipe works great! Went right in without pulling the engine. Excellent customer service.
